了解PVD涂層
聯系我們
聯系人：譚經理
手 機：13901543070
傳 真：0512-62822758
郵 箱：GLD_coating11@163.com
地 址：蘇州自貿區工業園區淞北路45號4幢103室
-
PVD厚度測試THICKNESSTEST
標準直徑不銹鋼在便準壓力下添加金剛石磨料強化磨損涂層面， 當涂層磨穿顯示基體材料后利用測量軟件計算涂層厚度， 同時可觀察涂層結構。
Add iamoanbdr astiosav tned adrida meersat inlseetsesl undseatrn gaprrde ssaudrdei amoabnradsiv e improved grinding damage level, when the coating is worn through the dispsluabrysae tmt aetriatafelrm easusrofitwnarge i s used toc alcetu hatheti cknofe thse cso ating, and observed the coiantsgrt uucrte.
-
PVD附著性測試AOHESIONTEST
觀察壓痕毫米級形變后涂層與基本材料的結合顯微照片，參照標準照對確定附著性等級。
Observed indentation millimeter deformation after the combination of coating and substrate materials microstructure pictures,reference standaed according to determine the level of adhesion.
-
硬度測試HARONESSTEST
觀察壓痕毫米級形變用標準軟件測量顯微金剛石壓頭形成的四棱錐形尺寸， 從而計算薄膜硬度。
Observe creasing millimeter deformation formed by standard software was used to measure micro diamond indenter rectangular pyramid shape size,thus the film hardness iscalceudl.at
-
耐磨性測試COATINGWEAR RESITRANCETEST
標準直徑不銹鋼在標準壓力下添加金剛石磨料強化磨損涂層面， 計算涂層被磨損掉的總時間來標定涂層耐磨損性能。
Satndadrida meersat inlseetseusln dseatrn dardpressaudrdei amoanbdr asiimvper ogvreidn dingdamalgeev ceall,ciuoolnfat toatl imteoc aliebc roiantgweaoru cto iantwge arre sainscptee orrfmance.
-
涂層參數COATIONGINFORMATION
涂層Coatings
薄膜硬度Hardness(Hv) 工藝溫度
Process temperature(℃
熱穩定性
Thermal Stability(℃)
摩擦系數
Coefficientofr icftiong
涂層顏色
Coating colour
TIN 3000 500 600 0.4 CRN 2500 400 700 0.2 DLC 2500 200 300 0.06-0.1 ALCRN 3500 500 1100 0.3 TIALN 4500 500 900 0.3 薄膜硬度是指在標準測試條件下獲得的顯微維氏硬度。
Film hardness refers to the micro vickers hardness standard test conditions.
熱穩定性是指在常溫條件下涂層的耐受最高溫度。
Thermal stability refers to the tolerance of the maximum temperature of coating under normal conditions.
涂層顏色為基準色， 因產品形狀以及工藝不同存在輕微偏差。
Coating color for reference color, there is slight deviation on the basis of different shape of product and process.